Effect of High-radiant Emittance and Short Curing Time on Polymerization Shrinkage Vectors of Bulk Fill Composites.

PURPOSE: To evaluate the effect of short curing time using a high-radiant emittance light on polymerization shrinkage vectors in different consistency bulk-fill composites (BFRCs) using micro-computed tomography. METHODS AND MATERIALS: Radiopaque zirconia fillers were homogeneously incorporated and functioned as radiopaque tracers into two regular-paste: TBFill (Tetric EvoCeram Bulk Fill) and TPFill (Tetric PowerFill), and two flowable (n=6): TBFlow (Tetric EvoFlow Bulk Fill) and TPFlow (Tetric PowerFlow) resin composites. Class I cavities (4 mm depth × 4 mm length × 4 mm width) were 3D-printed and filled in a single increment: TBFill and TBFlow were light-activated using a Bluephase Style 20i (10 seconds in high-mode); TPFill and TPFlow were light-activated using a Bluephase PowerCure (three seconds). The same adhesive system (Adhese Universal) was used for all groups. Microcomputed tomography scans were obtained before and after light-activation. Filler particle movement was identified by polymerization shrinkage vectors at five depths (from 0-4 mm): top, top-middle, middle, middle-bottom and bottom. RESULTS: TPFlow showed the lowest total vector displacement, followed by TBFlow, TBFill and TPFill, significantly different among each other (p<0.05). Generally, BFRCs showed decreased vector displacement with increased depth, and higher displacement at the top-surface (p<0.05). Qualitative analysis showed a similar pattern of vector magnitude and displacement for groups TBFill and TPFill, with displacement vectors on occlusal (top) surfaces toward the center of the restoration from the top to middle areas, and relatively limited displacement at the bottom. TBFlow and TPFlow showed more displacement on the occlusal (top). CONCLUSIONS: Short curing time with high-radiant emittance on fast-curing BFRCs was shown to be a feasible option in terms of vector displacement. Flowable BFRCs presented lower vector displacement than their regular-viscosity versions.

Interpretable AI Explores Effective Components of CAD/CAM Resin Composites.

High flexural strength of computer-aided manufacturing resin composite blocks (CAD/CAM RCBs) are required in clinical scenarios. However, the conventional in vitro approach of modifying materials' composition by trial and error was not efficient to explore the effective components that contribute to the flexural strength. Machine learning (ML) is a powerful tool to achieve the above goals. Therefore, the aim of this study was to develop ML models to predict the flexural strength of CAD/CAM RCBs and explore the components that affect flexural strength as the first step. The composition of 12 commercially available products and flexural strength were collected from the manufacturers and literature. The initial data consisted of 16 attributes and 12 samples. Considering that the input data for each sample were recognized as a multidimensional vector, a fluctuation range of 0.1 was proposed for each vector and the number of samples was augmented to 120. Regression algorithms-that is, random forest (RF), extra trees, gradient boosting decision tree, light gradient boosting machine, and extreme gradient boosting-were used to develop 5 ML models to predict flexural strength. An exhaustive search and feature importance analysis were conducted to analyze the effective components that affected flexural strength. The R2 values for each model were 0.947, 0.997, 0.998, 0.983, and 0.927, respectively. The relative errors of all the algorithms were within 15%. Among the high predicted flexural strength group in the exhaustive search, urethane dimethacrylate was contained in all compositions. Filler content and triethylene glycol dimethacrylate were the top 2 features predicted by all models in the feature importance analysis. ZrSiO4 was the third important feature for all models, except the RF model. The ML models established in this study successfully predicted the flexural strength of CAD/CAM RCBs and identified the effective components that affected flexural strength based on the available data set.

Technical skills simulation in transplant surgery: a systematic review.

Purpose:  Transplant surgery is a demanding field in which the technical skills of the surgeon correlates with patient outcomes. As such, there is potential for simulation-based training to play an important role in technical skill acquisition. This study provides a systematic assessment of the current literature regarding the use of simulation to improve surgeon technical skills in transplantation. Methods:  Data were collected by performing an electronic search of the PubMed and Scopus database for articles describing simulation in transplant surgery. The abstracts were screened using the preferred reporting items for systematic reviews and meta-analysis (PRISMA) guidelines. Three reviewers analyzed 172 abstracts and agreed upon articles that met the inclusion criteria for the systematic review. Results:  Simulators can be categorized into virtual reality simulators, cadaveric models, animal models (animate or inanimate) and synthetic physical models. No virtual reality simulators in transplant surgery are described in the literature. Three cadaveric models, seven animal models and eight synthetic physical models specific to transplant surgery are described. A total of 18 publications focusing on technical skills simulation in kidney, liver, lung, pancreas, and cardiac transplantation were found with the majority focusing on kidney transplantation. Conclusions:  This systematic review identifies currently reported simulation models in transplant surgery. This will serve as a reference for general surgery and transplant surgery professionals interested in using simulation to enhance their technical skills.

The influence of vulnerability on depression among Japanese university athletes.

Objective: This study examined the estimated causal relationship between vulnerability and depressive symptoms in Japanese university athletes and how the degree of vulnerability affects depressive symptoms. Materials and methods: In Study 1, 248 Japanese university athletes completed a continual survey from Time 1 to Time 3. In Study 2, 562 Japanese university athletes responded to another survey during the same period. Structural equation modeling was performed to estimate the causal relationship using the cross-lagged effects model for the three waves. Next, a binomial logistic regression analysis was performed to examine the influence of vulnerability on depression. Results: Results of the cross-lagged effects model showed that all paths from vulnerability to depressive symptoms were significant, and all paths from depressive symptoms to vulnerability were not significant. Thus, vulnerability was the causative variable and depressive symptoms were the outcome variables within the causal relationship. The logistic regression results showed that those with high vulnerability were 1.7 times more likely to have moderate or higher depressive symptoms than those with low vulnerability. Vulnerable individuals are at a higher risk for developing depressive symptoms. By verifying the causal relationship between vulnerability and depressive symptoms, we can contribute to the enhancement of mental health care in accordance with the weakest link model. Appropriate psychological support for athletes can decrease depression and improve their mental health.

Genetic parameters for conception rate and milk production traits within and across Holstein herds with different housing types and feeding systems during the first 3 lactations.

The housing types (HST) in which dairy cows are kept and the feeding systems (FDS) used differ among farmers in Japan. Here, we investigated the genetic relationships among conception rate at first insemination (CR) and milk production traits (PROD) during the first 3 lactations of Holstein cows by using a multiple-trait model that considered the trait values of herds with different HST [tiestall (TSL) barn, freestall (FS) barn, or grazing (GZ)] and FDS as separate traits. Milk production and conception records of Holstein cows in the Hokkaido region of Japan (283,611 records for first lactation, 253,902 for second, and 181,197 for third) were analyzed. We categorized herds with TSL or FS into 2 types of FDS for cows: separate feeding (SF) of roughage plus concentrate or feeding of total mixed ration, in which roughage and concentrates were mixed before feeding. The PROD analyzed were cumulative milk, fat, and protein yields within 305 d and lactation persistency, which we defined as the difference between milk yields at 240 and 60 d in milk. We estimated the heritabilities for CR or PROD within each HST or HST × FDS group and the genetic correlations between these traits within each group or across different groups within each lactation by using a 3-HST (TSL, FS, and GZ) × 2-trait (CR and each PROD) or 2-HST (TSL and FS) × 2-FDS × 2-trait animal model. Heritability estimates for CR in GZ were higher than those in TSL or FS, and genetic correlations for CR between GZ and TSL or FS barns were weaker than those between TSL and FS barns. In addition, genetic correlations between CR and PROD in GZ were weaker than those in TSL and FS barns. In the comparison among the 4 HST × FDS except GZ, heritability estimates for CR in FS × SF were higher than those in the others, and genetic correlations for CR between FS × SF and the other systems were relatively weak. These results indicated that differences in the production system for Holstein cows influence genotypic effects in terms of the cows' ability to conceive and the genetic relationships between fertility traits and milk production traits.

The mechanical and chemical stability of the interfaces in bioactive materials: The substrate-bioactive surface layer and hydroxyapatite-bioactive surface layer interfaces.

Bioactive materials should maintain their properties during implantation and for long time in contact with physiological fluids and tissues. In the present research, five different bioactive materials (a bioactive glass and four different chemically treated bioactive titanium surfaces) have been studied and compared in terms of mechanical stability of the surface bioactive layer-substrate interface, their long term bioactivity, the type of hydroxyapatite matured and the stability of the hydroxyapatite-surface bioactive layer interface. Numerous physical and chemical analyses (such as Raman spectroscopy, macro and micro scratch tests, soaking in SBF, Field Emission Scanning Electron Microscopy equipped with Energy Dispersive Spectroscopy (SEM-EDS), zeta potential measurements and Fourier Transformed Infra-Red spectroscopy (FTIR) with chemical imaging) were used. Scratch measurements evidenced differences among the metallic surfaces concerning the mechanical stability of the surface bioactive layer-substrate interface. All the surfaces, despite of different kinetics of bioactivity, are covered by a bone like carbonate-hydroxyapatite with B-type substitution after 28 days of soaking in SBF. However, the stability of the apatite layer is not the same for all the materials: dissolution occurs at pH around 4 (close to inflammation condition) in a more pronounced way for the surfaces with faster bioactivity together with detachment of the surface bioactive layer. A protocol of characterization is here suggested to predict the implant-bone interface stability.

Novel method for endovascular fenestration using radiofrequency transseptal needle for aortic dissection with malperfusion syndrome.

Malperfusion syndrome is considered one of the most significant adverse events in aortic dissection disease and often requires invasive strategies to improve ischemia. We report the case of a patient who was presented with worsening claudication and leg rest pain due to malperfusion syndrome of type B aortic dissection. We successfully performed endovascular fenestration therapy to relieve the symptom by using a NRG radiofrequency transseptal needle (Baylis Medical, Montreal, Canada). We suggest that this novel method would be available for the patients with malperfusion syndrome of aortic dissection.

Bioactive materials: In vitro investigation of different mechanisms of hydroxyapatite precipitation.

Bioactive materials, able to induce hydroxyapatite precipitation in contact with body fluids, are of great interest for their bone bonding capacity. . The aim of this paper is to compare bioactive materials with different surface features to verify the mechanisms of action and the relationship with kinetics and type of precipitated hydroxyapatite over time. Four different surface treatments for Ti/Ti6Al4V alloy and a bioactive glass were selected and a different mechanism of bioactivity is supposed for each of them. Apart from the conventional techniques (FESEM, XPS and EDX), less common characterizations (zeta potential measurements on solid surfaces and FTIR chemical imaging) were applied. The results suggest that the OH groups on the surface have several effects: the total number of the OH groups mainly affects hydrophilicity of surfaces, while the isoelectric points, surface charge and ions attraction mainly depend on OH acidic/basic strength. Kinetics of hydroxyapatite precipitation is faster when it involves a mechanism of ion exchange while it is slower when it is due to electrostatic effects . The electrostatic effect cooperates with ion exchange and it speeds up kinetics of hydroxyapatite precipitation. Different bioactive surfaces are able to differently induce precipitation of type A and B of hydroxyapatite, as well as different degrees of crystallinity and carbonation. STATEMENT OF SIGNIFICANCE: The bone is made of a ceramic phase (a specific type of hydroxyapatite), a network of collagen fibers and the biological tissue. A strong bond of an orthopedic or dental implant with the bone is achieved by bioactive materials where precipitation and growth of hydroxyapatite occurs on the implant surface starting from the ions in the physiological fluids. Several bioactive materials are already known and used, but their mechanism of action is not completely known and the type of precipitated hydroxyapatite not fully investigated. In this work, bioactive titanium and bioglass surfaces are compared through conventional and innovative methodologies. Different mechanisms of bioactivity are identified, with different kinetics and the materials are able to induce precipitation of different types of hydroxyapatite, with different degree of crystallinity and carbonation.

Predicting the Debonding of CAD/CAM Composite Resin Crowns with AI.

A preventive measure for debonding has not been established and is highly desirable to improve the survival rate of computer-aided design/computer-aided manufacturing (CAD/CAM) composite resin (CR) crowns. The aim of this study was to assess the usefulness of deep learning with a convolution neural network (CNN) method to predict the debonding probability of CAD/CAM CR crowns from 2-dimensional images captured from 3-dimensional (3D) stereolithography models of a die scanned by a 3D oral scanner. All cases of CAD/CAM CR crowns were manufactured from April 2014 to November 2015 at the Division of Prosthodontics, Osaka University Dental Hospital (Ethical Review Board at Osaka University, approval H27-E11). The data set consisted of a total of 24 cases: 12 trouble-free and 12 debonding as known labels. A total of 8,640 images were randomly divided into 6,480 training and validation images and 2,160 test images. Deep learning with a CNN method was conducted to develop a learning model to predict the debonding probability. The prediction accuracy, precision, recall, F-measure, receiver operating characteristic, and area under the curve of the learning model were assessed for the test images. Also, the mean calculation time was measured during the prediction for the test images. The prediction accuracy, precision, recall, and F-measure values of deep learning with a CNN method for the prediction of the debonding probability were 98.5%, 97.0%, 100%, and 0.985, respectively. The mean calculation time was 2 ms/step for 2,160 test images. The area under the curve was 0.998. Artificial intelligence (AI) technology-that is, the deep learning with a CNN method established in this study-demonstrated considerably good performance in terms of predicting the debonding probability of a CAD/CAM CR crown with 3D stereolithography models of a die scanned from patients.

Influence of the anatomical form of the posterior maxilla on the reliability of superior maxillary repositioning by Le Fort I osteotomy.

Certain patients with facial deformities require superior repositioning of the maxilla via Le Fort I osteotomy; however, the magnitude of superior repositioning of the maxilla is often less than expected. In this study, the correlation between the accuracy of superior repositioning of the maxilla and the anatomical form of the maxillary posterior region was examined. Seventy-five patients who underwent Le Fort I osteotomy without forward movement of the maxilla but with superior repositioning of the maxilla were included in this study. The bone volume around the descending palatine artery (DPA), the angle of the junction between the pterygoid process and the tuberosity, and the distance between the upper second molar and the pterygoid process were measured via three-dimensional analysis. A significant negative correlation (r=-0.566) was found between the bone volume around the DPA and the ratio of repositioning (actual movement divided by expected movement). It is possible that the superior repositioning of the maxilla expected prior to surgery was not sufficiently attained because of the large volume of bone around the DPA. The results of this study show that in some patients, superior repositioning was not achieved at the expected level because of bone interference attributable to the anatomical form of the maxillary posterior region.

The effect of femoral bone tunnel configuration on tendon-bone healing in an anterior cruciate ligament reconstruction: An animal study.

OBJECTIVES: To compare the effect of femoral bone tunnel configuration on tendon-bone healing in an anterior cruciate ligament (ACL) reconstruction animal model. METHODS: Anterior cruciate ligament reconstruction using the plantaris tendon as graft material was performed on both knees of 24 rabbits (48 knees) to mimic ACL reconstruction by two different suspensory fixation devices for graft fixation. For the adjustable fixation device model (Socket group; group S), a 5 mm deep socket was created in the lateral femoral condyle (LFC) of the right knee. For the fixed-loop model (Tunnel group; group T), a femoral tunnel penetrating the LFC was created in the left knee. Animals were sacrificed at four and eight weeks after surgery for histological evaluation and biomechanical testing. RESULTS: Histologically, both groups showed a mixture of direct and indirect healing patterns at four weeks, whereas only indirect healing patterns were observed in both groups at eight weeks. No significant histological differences were seen between the two groups at four and eight weeks in the roof zone (four weeks, S: mean 4.8 sd 1.7, T: mean 4.5 sd 0.5, p = 0.14; eight weeks, S: mean 5.8 sd 0.8, T: mean 4.8 sd 1.8, p = 0.88, Mann-Whitney U test) or side zone (four weeks, S: mean 5.0 sd 1.2, T: mean 4.8 sd 0.4, p = 0.43; eight weeks, S: mean 5.3 sd 0.8,T: mean 5.5 sd 0.8, p = 0.61, Mann-Whitney U test) . Similarly, no significant difference was seen in the maximum failure load between group S and group T at four (15.6 sd 9.0N and 13.1 sd 5.6N) or eight weeks (12.6 sd 3.6N and 17.1 sd 6.4N, respectively). CONCLUSION: Regardless of bone tunnel configuration, tendon-bone healing after ACL reconstruction primarily occurred through indirect healing. No significant histological or mechanical differences were observed between adjustable and fixed-loop femoral cortical suspension methods.Cite this article: Y. Sato, R. Akagi, Y. Akatsu, Y. Matsuura, S. Takahashi, S. Yamaguchi, T. Enomoto, R. Nakagawa, H. Hoshi, T. Sasaki, S. Kimura, Y. Ogawa, A. Sadamasu, S. Ohtori, T. Sasho. The effect of femoral bone tunnel configuration on tendon-bone healing in an anterior cruciate ligament reconstruction: An animal study. Bone Joint Res 2018;7:327-335. DOI: 10.1302/2046-3758.75.BJR-2017-0238.R2.

Interval timing errors in a patient with thalamic chronotaraxis.

Thalamic chronotaraxis is an isolated disorientation of time caused by the damage of thalamus, especially the mediodorsal nucleus. We performed interval timing trials on a patient with this phenomenon. Based on the results of those trials and compared to the previous reports, thalamic chronotaraxis of our case might be due to the disfunction of the dorsolateral prefrontal cortex caused by the right thalamic infarction.

A randomised controlled trial of repeated filmed social contact on reducing mental illness-related stigma in young adults.

AIMS: Public stigma alters attitudes towards people with mental illness, and is a particular concern for young people since most mental health problems occur in adolescence and young adulthood. However, little is known about the long-term effects of repeated filmed social contact (FSC) on reducing mental health-related stigma among young adults in the general population, compared with self-instructional Internet search (INS) and control interventions. METHODS: This study is a parallel-group randomised controlled trial over 12 months conducted in Tokyo, Japan. A total of 259 university students (male n = 150, mean age = 20.0 years, s.d. = 1.2) were recruited from 20 colleges and universities between November 2013 and July 2014, without being provided information about the mental health-related survey or trial. Participants were assigned to one of three groups before completion of the baseline survey (FSC/INS/control = 89/83/87). The FSC group received a computer-based 30-min social contact film with general mental health education and five follow-up web-based FSCs at 2-month intervals. The INS group undertook a 30-min search for mental health-related information with five follow-up web-based reminders for self-instructional searches at 2-month intervals. The control group played PC games and had no follow-up intervention. The main outcome measures were the future (intended behaviour) domain of the Reported and Intended Behaviour Scale at 12 months after the intervention. Analysis was conducted in September 2015. RESULTS: At the 12-month follow-up, 218 participants completed the survey (84.1%, 75:70:73). The FSC group showed the greatest change at the 12-month follow-up (FSC: mean change 2.11 [95% CI 1.49, 2.73], INS: 1.04 [0.29, 1.80], control: 0.71 [0.09, 1.33]; FSC v. INS p = 0.037, FSC v. controls p = 0.004). No adverse events were reported during the follow-up period. CONCLUSIONS: FSC was more successful in reducing stigma at 12 months after intervention than INS or control interventions. FSC could be used to reduce stigma in educational lectures and anti-stigma campaigns targeted at young people. STUDY REGISTRATION: This study is registered at UMIN-CTR (No. UMIN000012239).

Analysis of masticatory muscle coordination during unilateral single-tooth clenching using muscle functional magnetic resonance imaging.

In a previous study, we used muscle functional magnetic resonance imaging to show that the anterior movement of the occlusal point increased the activity of the superior head of the ipsilateral lateral pterygoid muscle (ipsilateral SHLP) during unilateral single-tooth clenching. The purpose of this study was to verify the hypothesis that the increased activity of the ipsilateral SHLP described above serves to antagonise the occlusal force acting on the condyle. In total, 9 healthy volunteers were requested to perform left unilateral clenching at the first molar or first premolar region for 1 minute at 20% or 40% maximum voluntary clenching force. Changes in the mean proton transverse relaxation time (∆T2) were examined from the magnetic resonance images obtained before and after each clenching act as an index of the activity in all masticatory muscles. Correlation analyses of the mean ΔT2 for each volume of interest were performed with the first molar or premolar clenches to analyse the correlation between the activities in each muscle. A statistically significant correlation was exhibited between the ipsilateral temporal and ipsilateral SHLP (r = .651, P = .003) during first premolar clenching. However, no significant correlations were observed in the ipsilateral SHLP during first molar clenching. The results of this study suggest that the ipsilateral SHLP may contribute to the pulling of the mandibular condyle forward against the occlusal force generated by the ipsilateral temporal muscle.

Associations of three-dimensional T1 rho MR mapping and three-dimensional T2 mapping with macroscopic and histologic grading as a biomarker for early articular degeneration of knee cartilage.

T1 rho and T2 mapping are magnetic resonance imaging (MRI) techniques to detect early degenerative changes in cartilage. Recent advancements have enabled 3D acquisition for both techniques. The objective of the present study was to examine the correlation of 3D T1 rho and 3D T2 mapping with macroscopic and histological characteristics of knee cartilage. Twenty-one patients who underwent total knee arthroplasty due to osteoarthritis with involvement of the medial compartment but with minimum involvement of the lateral compartment were enrolled. Prior to surgery, five series of MRI were acquired with a 3-T scanner. 3D T1 rho/T2 analyses were performed following determination of regions to be assessed using in-house software that incorporated three series of MRI acquisitions data (3D-MERGE, 3D-SPGR, and 3D-CUBE). During surgery, the cartilage of the lateral compartment was macroscopically assessed with the International Cartilage Research Society (ICRS) articular classification system. The extracted specimens were histologically assessed using the OARSI histology score. Three regions of interest (ROI) were assessed for each slice (two slices per knee): the central lateral femoral condyle (cLFC), the posterior portion of the lateral femoral condyle (pLFC), and the lateral tibia plateau (LTP). For each ROI, the mean T1 rho and T2 relaxation time, the ICRS grade, and the OARSI score were compared. Neither the T1 rho nor the T2 reflected the macroscopic grading. The T1 rho could discriminate between histological grades 1 and 2. However, the T2 could not. The T1 rho relaxation time was higher in the pLFC than in the cLFC even in the same grade. Compared to T2 mapping, T1 rho mapping may have an advantage in differentiating grades I and II cartilage degeneration on OARSI histological grading system.

Development of 2-D horn-antenna millimeter-wave imaging device (HMID) for the plasma diagnostics.

The two-dimensional (2-D) Horn-antenna Millimeter-wave Imaging Device (HMID) has been developed for the O-mode Microwave Imaging Reflectometry (O-MIR) in the Large Helical Device (LHD). The detectable frequency range of the HMID is 23-33 GHz, which corresponds to the cutoff electron density of 0.8-1.5 × 1019 m-3 in the O-MIR. The HMID is a 2-D imaging device that improves on the horn-antenna mixer array, which had been developed for the X-mode MIR in the LHD. In the HMID, the signal (RF) wave from the horn antenna is transmitted to the microstrip line by the finline transmitter, and this is mixed by the double-balanced-mixer with the local oscillation wave that is fed by a coaxial cable. By using the HMID, the MIR optical system can be significantly simplified.

A randomized controlled phase II clinical trial comparing ONO-4053, a novel DP1 antagonist, with a leukotriene receptor antagonist pranlukast in patients with seasonal allergic rhinitis.

BACKGROUND: Prostaglandin D2 (PGD2 ) is primarily produced by mast cells and is contributing to the nasal symptoms including nasal obstruction and rhinorrhea. OBJECTIVE: This study aimed to evaluate the efficacy and safety of a novel PGD2 receptor 1 (DP1) antagonist, ONO-4053, in patients with seasonal allergic rhinitis (SAR). METHODS: This study was a multicenter, randomized, double-blind, parallel-group study of patients with SAR. Following a one-week period of placebo run-in, patients who met the study criteria were randomized to either the ONO-4053, leukotriene receptor antagonist pranlukast, or placebo group for a two-week treatment period. A total of 200 patients were planned to be randomly assigned to receive ONO-4053, pranlukast, or placebo in a 2:2:1 ratio. Nasal and eye symptoms were evaluated. RESULTS: Both ONO-4053 and pranlukast had higher efficacy than placebo on all nasal and eye symptoms. ONO-4053 outperformed pranlukast in a total of three nasal symptom scores (T3NSS) as well as in individual scores for sneezing, rhinorrhea, and nasal itching. For T3NSS, the Bayesian posterior probabilities that pranlukast was better than placebo and ONO-4053 was better than pranlukast were 70.0% and 81.6%, respectively, suggesting that ONO-4053 has a higher efficacy compared with pranlukast. There was no safety-related issue in this study. CONCLUSIONS: We demonstrated that the efficacy of ONO-4053 was greater than that of pranlukast with a similar safety profile. This study indicates the potential of ONO-4053 for use as a treatment for SAR (JapicCTI-142706).

The recognition and incidence of peroneal tendon dislocation associated with a fracture of the talus.

AIMS: The purposes of this study were to clarify first, the incidence of peroneal tendon dislocation in patients with a fracture of the talus and second the factors associated with peroneal tendon dislocation. PATIENTS AND METHODS: We retrospectively examined 30 patients (30 ankles) with a mean age of 37.5 years, who had undergone internal fixation for a fracture of the talus. Independent examiners assessed for peroneal tendon dislocation using the pre-operative CT images. The medical records were also reviewed for the presence of peroneal tendon dislocation. The associations between the presence of dislocation with the patient characteristics or radiological findings, including age, mechanism of injury, severity of fracture, and fleck sign, were assessed using Fisher's exact tests. RESULTS: The pre-operative CT images showed peroneal tendon dislocation in eight out of 30 patients. Dislocation was found later in one patient whose pre-operative CT image had not shown dislocation. The overall incidence of peroneal tendon dislocation was 30% (9/30). The presence of dislocation was associated with the presence of a fleck sign (p = 0.03). CONCLUSIONS: Surprisingly, approximately one-third of the patients who underwent internal fixation for a fracture of the talus had peroneal tendon dislocation. This was associated with a fleck sign. Cite this article: Bone Joint J 2017;99-B:489-93.